Metal siding blockhouse. Price, characteristics

A blockhouse is usually called an ordinary long lining, which is joined using a groove-comb joint. It is produced in the form of profiled timber or logs with a cylindrical section. The material is intended for interior and exterior decoration of premises. Most often, such types of wood as pine, spruce and larch are used for production.Among the advantages of the finishing material, it is worth noting, first of all, mechanical strength. The facade of a building with such cladding will not be afraid of even fairly strong blows, as well as other physical impacts. It is also important to note that if the cladding is damaged, it is easy to repair it.It is impossible not to mention the high aesthetic properties of the block house, which is able to add a special luxury to the appearance. Due to its low weight, it does not carry a physical load on the foundation, so it can be used even for facades of frame houses and structures made of SIP panels. It is also important that when decorating a house with this material, its vapor permeability is maintained. The excess moisture that collects between the boards is discharged through the seams, as well as through the wood itself. That's why it's always easy to breathe in a block-house house.There are many options for finishing work, such as how to cover a block house, but we will choose the most difficult one for consideration - with additional insulation and wind protection. In fact, the whole procedure can be divided into six stages.- The blockhouse is unpacked and kept for about 5-7 days in the room where it will be installed or outdoors (necessarily under a canopy). This procedure is necessary to ensure that the material acquires optimal moisture and does not undergo further deformation.- The crate is fixed on the wall. A 50x50 mm beam is used to create it. The pitch between the two bars should be equal to the thickness of the facade insulation (mineral wool).- The insulation is placed between the bars. For additional fixation of the insulation, you can use dowel umbrellas.- A wind barrier is sewn with a stapler on top of the insulation to the grid. A vapor-permeable film can act as this element. It is necessary to protect the insulation from the damaging effects of the wind.- A counter-grid is attached to the crate through the wind shield. It is needed to create a gap between the blockhouse and the wind shield and thus create effective ventilation of the entire facade of the building.- The blockhouse is attached to the counter-grid. It is best to use kleimers for this, because this way all the work will be as invisible as possible.Following these simple rules, you can easily handle the facade cladding yourself. ebiteua.com